QuoteApplicable Standard: TCVN 7675-27
Magnet copper wire, available in round or rectangular cross-sections, with a cross-sectional area S ≤ 150 mm².
Bare copper wire; paper-insulated copper wire; single-conductor cable; and bundled 2-core and 3-core cables with insulation thickness as specified.
The resistivity of the wire at 20°C is not greater than 0.01724 Ω·mm²/m.
Please contact us for further consultation on selecting other products that meet your requirements.
Related transformers
500/18kV – 467MVA three-phase, step-up transformer
The 3-phase transformer, 500kV – 467MVA, is a type of end-winding transformer and has the highest capacity among the hydropower plants in Vietnam today. The[...]
500kV transmission transformer
The 500kV – 150MVA transformer plays a central role in linking the 500kV and 220kV voltage levels, ensuring efficient and stable power transmission. The 500kV[...]
220kV transformer
Máy biến áp tự ngẫu (Auto Transformer) 220/110/22kV – 250MVA có nhiệm vụ kết nối lưới điện 220kV và 110kV, giúp tối ưu hóa truyền[...]
110kV transformer
The 110/35/22kV – 63MVA transformer is the most commonly used transformer in 110kV substations in the northern provinces of Vietnam. The 63MVA transformers manufactured by[...]
Sealed-Type Transformer
Các loại máy biến áp phân phối kiểu kín được chế tạo, thử nghiệm theo IEC60076, TCVN 6306-1: 2015 (IEC 60076-1: 2011) và các quy[...]
Transformer with conservator
Các loại máy biến áp phân phối kiểu có bình dầu phụ (kiểu hở) được chế tạo, thử nghiệm theo IEC60076, TCVN 6306-1: 2015 (IEC[...]
Dry type transformer
Dry-type distribution transformers are manufactured and tested in compliance with IEC 60076-11 (2018), TCVN 6306-1:2015, and the current regulations of EVN. They are designed for[...]
